Monopoly Junior Inset Boxes

Monopoly Junior Inset Boxes to get rid of the storage chaos with several plastic bags
4h 59m
2× print file
0.30 mm
0.40 mm
111.00 g
8
37
0
980
updated May 24, 2021

Description

PDF

When we bought our Monopoly Junior there was a huge amount of loose plastic bags contained carrying all items like dice, cards, money, figures and so on. Storage of all the items in this plastic bags took some minutes after each game and so I wanted to get rid of this chaos (and to reduce the amount of damaged plastic bags after several played Monopoly games with the kids).

 

→ I designed two inset boxes:

  • One box for each player (holding cards and figure)
  • A bigger box (holding money, cards and dice)

 

Placing of the inset boxes in the original Monopoly Junior box:

The inset boxes can be placed at one side of the original paper case as you like to have it. The gameboard lays (when the inset boxes are inserted) on top of the inset boxes and no longer below the paper case or on one side of the paper case.

 

Advantages:

Now each player can take his own box out of the game package. The bigger box can be used as a kind of bank besides the game board. The sorting of all items after each Monopoly round takes now less time and the amount of plastic is reduced to zero (besides the used filament ;-)).

 

Print Instructions (tested without any issues):

Print orientation as shown in the attached STL file

PLA

0.3 mm

20% infill

No support

 

In case you want to configure or adapt the boxes for yourself I have attached my configurable SCAD files.

Tags



Model origin

The author hasn't provided the model origin yet.

License