Twist Rocket - full Close

While the top fits; it does appear to be a very tight fit.   Recommend resizing the top to 102% in both X and Y if you want a loose thread that will close under its own weight.

Printed great with 10% infill.   I would recommend 25-30% if you want to hold quarters, or anything with weight.   I've had a few containers break with light infill.

I wanted this to fully close, so I updated the original top STL file from @itsBoyinSpace_301004.   I also included a base without the fins.  I had several people ask me for this to use as a quarters container without fins.  Was easy enough to do.