Upgraded Side Spool Holder K1/K1 MAX (Remix)

I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm).

In addition to these other changes, I placed the Letters K1 on the side of the spool holder


PLA Revolution Carbon

Printed with a Regular 0,6 Vulcano nozzle on K1

Sliced with OrcaSlicer.

No Supports

0,25mm layer height

3 Walls

35% infill Tri Hexagon

Took 59 minutes to print

23mm3/S Volumetric Flow Rate (i have some extrusion issues with more than 24mm)

I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm).

In addition to these other changes, I placed the Letters K1 on the side of the spool holder