Meta Quest 3 Headstrap Quick Swap Helper

If you have more than one strap that you want to swap out for gaming, media or work. Then this would be a solution
16
50
0
542
updated December 7, 2023

Description

PDF

Why
I have 3 different head straps for my headset and when changing I am most annoyed by the threading of the overhead strap at the top of the headset. So I came up with a simple solution.

You'll need a little bit of velcro tape for that. I only had 10 mm for my cable ties so I made 3 versions for up to 10mm, up to 16 and for about 25-33 mm wide velcro tape.

Print

0.2 Layer height
3 Walls
4 Shell density for top/bottom
Infill 25%

Install

I cut the velcro to a length of 6 cm, more is certainly possible, less will be tight. Then I threaded the individual bands on the headset and then put them through my QuickSwap and chained them together.
 

Now you can use your new found freedom to change your Headstrap with much less effort
 

 

Tags



Model origin

The author marked this model as their own original creation.

License