Edge Tracing / Outline Tool with Flat and Round Guides

Flat and rounded edge tracing / outline guides to replace the original tracing wheel.

I created new guides to fit on the Edge Tracer since the wheel sometimes didn't work as well as I would like. The rounded guide is helpful if you want to trace with the tool at an angle.

I reduced the tolerance so the guide fit on the post without any split rings, but the split rings can still be used for some added security.

I also created my own split rings because the original ones did not fit very closely to the tool.

To Print:

Use the original Edge Tracer file (Reuploaded below) along with either the flat or rounded guide. Optionally, you can also use the modified split rings.

Flat and rounded edge tracing / outline guides to replace the original tracing wheel.

I created new guides to fit on the Edge Tracer since the wheel sometimes didn't work as well as I would like. The rounded guide is helpful if you want to trace with the tool at an angle.

I reduced the tolerance so the guide fit on the post without any split rings, but the split rings can still be used for some added security.

I also created my own split rings because the original ones did not fit very closely to the tool.