I printed fuchsr's remix some time ago - here's two add-ons I made, that might be interesting for you ... adapter/extender for Mk4S https://www.printables.com/model/1147492-prusa-mk4s-adapter-for-esp32-cam-case and ring light for cam case https://www.printables.com/model/1147477-ring-light-for-esp32-cam-case (edited)
Initially, it worked very well. But I quickly noticed the issue with this. The esp32cam exceeds 75°C (w/o printer enclosure). This will probably damage the hardware on the long run (not sure if it already did, see green tint). I will try the remix that comes with cooling slots. (edited)
Printed with PETG on my MK4.
It came out nice and fits well on my Z axis.
I'm not really happy with the angle of the camera, will probably continue looking for a way to mount the camera upwards instead of downwards so I have a better overview instead of a close-up.
the lid of the case gave up after 14 hours of prints :S
i do LOVE How well the desgin on top of the Z axe is made though, so i will be keeping that. I will however go look for a different more ventilated case
Thanks for the Model! :) My MK4 behaves a little odd with CF, but this is just a littlie Post Processing. Looks good so far!
Waiting for my ESP32CAM_MBs to arrive
I have printed it in eSun black PETG.
15% infill, 0.2 layer height, 0.4 nozzle, M3x18 screw.
The fit is too loose for my liking and the camera that came with my kit is a little smaller. Overall I'm super happy with the mount and used the x-axis base from https://www.printables.com/model/708100-replacement-x-axis-base-for-mk4-camera-mount
Thank you for the model! (edited)
