Bag clip - NO supports version ("Polygonal" version)

No-supports version, perfect to print in PETG.

Print instructions:

• Print in the orientation the STLs are imported
• Use at least 3 perimeter walls for strength (4 is even better)
• Supports are NOT necessary

To assemble, just put all parts together, super easy.

Be aware that the square version has a larger opening, so it can fit slightly larger bags:

https://www.printables.com/model/668086-spring-loaded-bag-clip-with-fully-printed-mechanis

STEP file included. Feel free to remix and share, but please use the attribution feature.

Internal spring based on obijuan's design:
https://www.thingiverse.com/thing:21234

The entire part was redesigned on a different shape so it could be printed horizontally without any supports. Internal parts were also adapted.