action figure stand for Detolf shelf

A simple display stand that fits in Detolf glass display shelves. Great for 1:12 scale action figures.
21
127
0
982
updated November 26, 2024

Description

PDF

A three level figure stand to display four rows (one direct on glass) of figures in a Detolf shelf. Prints best in PETG, especially if you are printing the foot pegs.  I included a no peg version that can also be easily modified to add foot pegs where you want them. The one with pegs has 3mm diameter 3 mm high pegs which fit great for Mythic Legions figures.  My experience with GI Joe Classifieds is they run a little more random and you may need to adjust the peg size a bit up or down to get a snug fit.  

I have to split this model in two to print on my MK4, the split tool with the dovetail cut works great in PrusaSlicer for this.  

 If your pegs break, even in PETG, you can also try adding 3mm holes and using brass rods, but so far PETG ha been good in my experience. 

 

I added a new version with plates, that has recesses to glue in 0.025"x 1" x 10" stainless steel plates for if you insert 3x3mm magnets into the foot peg holes in your figures.  

Tags



Model origin

The author marked this model as their own original creation.

License