ANYCUBIC KOBRA MAX DIRECT DRIVE (Left Hand) Metal Extruder

I made one with OEM extruder and now I did one with all metal extruder because the OEM is hard to find if it broke and of the plastic pieces.

Here is the link to when I got this extruder. Amazon Extruder Upgraded Replacement Left Hand

Now when you replaced the extruder you will need to go the E-Steps.

I use the TH3D website to help get the calculation for the E-Steps. ←Link here

 Do at your our risk. I will not be responsible for any mistakes that you make or don't get the desired outcome.

 I use OctoPrint with Terminal to run the commands but you can use whatever you feel comfortable with.

the commands I run to Extrude 100mm

G91 E0

G1 E100 F100

Repeat the same 2 command as many times necessary to the desired E-Steps.

Just to remember to save after each update of you E-Steps.

Use the information from TH3D to update your E-Steps.

OEM to Metal Extruder