HSW wall holder
Fix it on a wall that cannot be drilled
32
126
0
1520
updated December 2, 2023
Description
PDFDue to the small contact area, sticking directly to the wall may not be very secure.This part can be fixed without drilling holes in the wall.Use m3 brass nut on the side of the reserved hole, and stick the other side to the wall with a snap fastener.Then screw the two together using the original wall fasteners.
Use M3x8 fhcs screw
Model origin
The author remixed this model.
Differences of the remix compared to the original
The original model needed to be fixed by drilling holes in the wall, so you can avoid drilling holes using it.