Update #1
I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel.
If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand, with a well-calibrated printer, they click into each other easily.
38mm diameter LED tea light fits comfortably in it.
If use the closed lower part, only use with the open upper part open.
I added an empty panel so you can put your own pattern on it or use it with infill.
Assembly
Print settings
The author marked this model as their own original creation.