Mar 20, 2021
This is a stand for a picture with a frame.
The frame should be at least 290mm wide and 16mm deep.
The depth at the back should be 7.5mm
To assemble the two parts, 2 countersunk screws M5x10 (DIN EN ISO 10642 oswe SIN 7991 or similar) are needed.
.......................................................................
Das ist ein Ständer für ein Bild mit Rahmen
Der Rahmen sollte mindestens 290mm breit und 16mm tief sein.
Die Tiefe an der Rückseite sollte 7,5mm betragen
Zum Zusammenbau der beiden Teile werden 2 Senkkopfschrauben M5x10 (DIN EN ISO 10642 oswe SIN 7991 o.ä.) benötigt.
Resolution:
0,2mm
Infill:
60
Filament:
PLA
The author marked this model as their own original creation. Imported from Thingiverse.