Itachi Uchiha

Filament painting with Itachi Uchiha, which is one of my favourite anime characters.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA BambuLab Basic Gray
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Charcoal Black
• At layer #9 (0.8mm) swap to Cement Gray
• At layer #11 (0.96mm) swap to Sunlu Gray
• At layer #13 (1.12mm) swap to BambuLab Gray
• At layer #21 (1.76mm) swap to White for the rest.