LED Riser for BambuLabs X1C

this is my take on a LED Riser for the BambuLabs X1C and the BLLED-Controller together with a RGBCW-Led-Strip.
40
257
2
1992
updated November 30, 2023

Makes

Comments

Fantástico diseño. Sencillo y muy elegante

@ThaWaz_1898880
Lovely. Your comment reminds me of this sentient bomb from the classic SciFi "Dark Star" - great!

I did not use the BL LED, module. I used a wired white strip that I can turn on and off, and adjust the brightness. The LED strip I ordered turned out to be an 8mm adhesive backed strip, so it ended up working. I un-soldered and re-soldered the cord to run it through the hole and added a zip-tie strain relief.

@SplinterPrinter Is there anyway you are able to make a version of this for a 12mm led strip vs the 10mm that it currently is for, please? (edited)

View 3 more comments

@SplinterPrinter @BeInYourSenses_25933 Thank you that helped. In the Profil Gesamt, are these two the only two dimensions (see red arrow in the picture I attached) I need to change in the model to make the width for the LED strip from 10mm to 12mm?

@BeInYourSenses_25933 If you get a 12mm version sorted out, please share. I need the same thing.

All comments loaded