The original nozzle that comes with the Bosch VAC090AH & VAC140AH is too large to use regular Central VAC attachments, so I create this new nozzle to work with them. It accepts the standard 35mm hose with the snap adapter ring. The hose inside dimensions are 32mm. This new nozzle fits the Bosch VH1035 (10 ft) and VH1635 (16ft) hoses. I've included both the .3mf and Fusion 360 .f3d files so you can make your own versions if you wish.
This nozzle adapter is just 1mm shy of the max Z axis of the Prusa MK4 at 220mm, so please keep that in mind if printing on the MK2 or MK3's which have a 210mm max.
Print Info
Filament: eSUN PLA+
Printer: Prusa MK4 with Input Shaper, .4mm nozzle
Layer Height: 0.2 mm, Structural Profile
Perimeters: 5
Infill: Grid, 20 %, although with perimeters set to 5 there is only a small amount of infill.
Supports: Support on build plate only. This is just a small amount inside the base where there is a 5mm overhang to match the 32mm inside diameter of the hose.
Adhesion: None
The author marked this model as their own original creation.