This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a thicker brim to help support the outer curves. there are NO SUPPORTS NEEDED if you position the file on your slice correctly face down. I used PLA+ but would recommend a very hard variation of TPU, this would make the model less brittle and less prone to cracks or separation of the pieces. Have fun with this model, it is truly a blast. I can say that as being a current AA Hockey player in Minnesota.
enjoy,
WigiLabs
The author marked this model as their own original creation.