TPU Case for Xiaomi 13T

A more stylish bumper case for the Xiaomi 13T smartphone, printable from TPU
32
469
1
1904
updated December 4, 2023

Description

PDF

The Xiaomi 13T already comes with a clear bumper case out of the box, but I wanted to give it a more personal touch. So, I designed this custom case.

The case can be printed from TPU with a Shore hardness of 95A or more. The frame around the camera (which sticks out quite a bit) is printed separately and glued into place afterwards. Consider printing the camera frame from a non-flexible material like PETG (just for extra protection, but TPU also works here).

Recommended layer height is 0.15mm

In addition to the cases with a pattern (Hex and Voronoi), I also added the blank one so you can add some customization of your own.

Happy printing!

Update (2023-12-01): Following some feedback I got, I added “sturdy” versions of all parts. In this version:

  • The case is ~30% thicker in all directions. A side effect of this is that the buttons don't protrude over the side of the case anymore, meaning they no longer get accidentally pressed as easily.
  • The frame around the camera is thicker and the inward slope is reduced. Plus, due to the added thickness of the case, the frame goes up higher over the camera, meaning better protection for the precious Leica optics.
  • The rim around the display reaches further inward, meaning the case doesn't slip off as quickly.

Update (2023-12-04): Noticed that the sturdier frame was covering the speaker at the top. This has been rectified now.

Tags



Model origin

The author marked this model as their own original creation.

License