Skelter5 LS20

 The Skelter5 LS20 is a lightweight version of the Skelter5 V2. This frame comes in around 119g compared to the 130g of the V2 frame. 

Frame specs.

• 20mm stack mounting only
• 20mm and 25.5mm rear mounting
• 5mm arms
• 23mm building height 
• 20mm camera spacing
• 5.1" max prop size
• frame weight 119g

This frame uses all of the same 3d prints for the Skelter5 V2 https://www.printables.com/model/618791-skelter5-v2 with the exception of the center arm tpu and the arm bumper guards. Everything else is fully compatible.

I have attached all necessary files that you or a cnc cutting service would need.

Cutting services 

• armattan productions 
• cncmadness/cncdrones

I'm currently using cncdrones for all my prototypes. The Skelter5 V2 is already on their site https://www.cncdrones.com/skelter5.html

To request a quote from a cnc cutting service you will need the attached dxf files as well as the spec/parts list in the images. Cncdrones offer hardware, standoffs, and press nuts. They do not offer a 3d printing service, so you will need to 3d print your own mounts, contact brain3d, or any other 3d printing services. If you have any questions about this frame feel free to leave a comment. I hope you enjoy this frame, and there will be more frames in the future.

The original Skelter5 was inspired by Alexandre Arvinte and the wu tank max at ledrone.club, also available on printables and cncdrones.com. Make sure to check out all his great designs as well