Gift Box

Check out build video:

https://youtu.be/vAdZ8FKphf0

Check out my patreon to download and sell my designs on your own stores with the commercial license:
https://patreon.com/MrCampbellPrints

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints https://youtube.com/@MrCampbellPrints

Can be printed without support if printed vertically 

But if printed horizontally use supports as 2 of the sides have raised slots to lock into one another.

I printed using Bambulab P1S with 0.2mm layer height and 15%infill.

I have also printed this model at 0.08mm/0.16mm and 0.24mm layer height with no issues,

I have scaled it all the way down to 20% and up to 160% (did have to cut model into several parts to fit in build plate at this scale) with no issues.

I have also printed in petg,pla, pla+, silk pla and abs with no issues.

The box itself dosent require glue to fir but I would recommend if wanting to move it frequently around the ribbons do require glue to stay on permanently, but I have found that they do friction fit if printed well enough.

Please check out my Youtube channel for instructions on how to put together if you are having issues.

https://youtube.com/@MrCampbellPrints?si=GYfj6FOiyxwVTitB