Posable Penguin Fidget

This customizable posable penguin makes for a festive fidget toy.
 

https://youtu.be/M_sV88fGf2U

Printing

• All parts can be printed without supports.
• Add brims if curling is an issue - especially the smaller pieces.
• Base and middle sections come in multicolor variants for multicolor printers.
• Use a filament swap to get 2 colors on penguin eyes.

Assembly

• Add eyes and beak to head section - add glue if these parts are loose.
• Thread TPU filament or similar thin elastic band from the penguin's head to base.
• Pull the band tight and tie the loop.
• Press the knot into the penguin base and trim any remaining cord.
• Optional: glue on hat
• Optional: glue on feet
• See the video above for the complete assembly process.

Customization

Check out this collection for more hats and accessories!

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.

Recommended Attribution Text

"Posable Penguin Fidget" (https://3dprinty.xyz/project/96) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

New penguin theme.