This mount is been used for mounting a OV3660 110° Rectangular camera module (https://www.amazon.it/gp/product/B088P1PKFM) to a panel of my homemade enclosure using four magnets (Two inside and two outside) to have it easy to remove.
File “SupportRail” has a little adjustment for the camera. Also a magnet holder is there keep the magnets inside the chamber toghether and avoid them going places (Trust me, they do).
It also have a couple of point to where attach zip ties for cable relief.
Use a M3x20 with a M3 nut for holding the camera mount to the magnetic rail. A couple of M3x6 to screw into the plastic. Uses round 10mm x 2mm magnets.
The author marked this model as their own original creation.