Christmas Tree with Ornaments

A modern and stylish Christmas tree with ornaments!

Ideal as a decorative piece for your home or office desk.

UPDATES

• 12/01/2023 - Added different style branches (classic/modern/symmetric/staggered). Added medium size ornaments (classic & modern). Increased thickness of small ornaments to 2mm.
• 11/28/2023 - Added 5 different style stands (for a total of 6)

General

The tree consists of different parts that are easily assembled without the need for additional material or tools.

• Stand: 1 piece, 6 styles to choose from.
• Trunk: 2 pieces (top & bottom)
• Branches: 4 sets (classic/modern each with symmetric or staggered design options). Each set consists of 5 different branch sizes. 6 branches of each size are needed for a total of 30 branches. 
• Tree topper: 2 pieces (outer & inner)
• Ornaments: 2 sets (classic/modern) in different sizes (small/medium) are provided. Each set consists of 6 different ornaments. Recommend printing a total of 48 ornaments, that is 2 ornaments per branch for the 3 larger branch sizes, and 1 ornament per branch for the smaller 2 branch sizes).

Dimensions (assembled, with tree topper)

Width: 21cm (8.3")
Height: 38cm (15")

3D printing settings

Stand & Trunk

• 0.2 layer height
• 20% infill
• supports are needed for the trunk under the top end of both pieces
• Use a brim around the trunk parts if you're having issues with bed adhesion

Everything else

• 0.24 layer height
• 100% infill
• no supports needed

Notes

I will be creating additional stands/ornaments/tree toppers and adding them to this model in the near future. Hoping to see others create and share their designs as well!

Feedback/Suggestions/Comments are welcome!

Please post your makes!