Long Range Wifi Antenna (Counter Clockwise)

The scaffold comes from a YouTuber that explains it way better than me here:
I used a helper tool (included) to form the coil, ideally AWG 12

I haven’t had a chance to properly test this yet but the range is at least on par with an eBay Cantenna I’d bought some years ago (and recently tore to pieces to start this project) which was at about 500ft distance, which bodes well for this being an as good or better design.

I used a stick of glue and 2 layers of tinfoil for the reflector

Buy list:

1x N-type connector
1x 8ft AWG 12 Wire (may take less).
1x N-type to SMA pig tail adapter cable
1x SMA-USB wifi adapter
2x 10mm bolts
2x 10mm nuts
1x filament (about 300g @15% infill)

16 JAN 2024 - Added v2 of the scaffold please print this one instead