Model of a beer crate, 1:10 scale.
All the dimensions are multiple of 0.5mm.
So the wall thickness should be 0.5mm (the width of the "nibble" you lay). I used width 0.5mm and height 0.3mm.
If you want to print the bottles I suggest to print more at once in order to give enough time to each layer to cool down.
The source code was written more or less in a haste and while writing it I didn't plan to show it to someone later. I also don't want to spent much time with beautifying it now. So.. read it on your own responsibility. ;)
Another of my models from time when thingiverse was new and quite empty. https://www.thingiverse.com/thing:21819
Category: Model Furniture
The author marked this model as their own original creation. Imported from Thingiverse.