Pegboard Hobby Paint Holder: 32-35mm

Works with FolkArt and DecoArt 59ml bottles (or any bottles between 32-35mm in diameter)
9
80
1
373
updated November 25, 2023

Description

PDF

This is a paint bottle holder for hanging on a pegboard. I adjusted a model I found on TinkerCAD to fit the FolkArt and DecoArt bottles I use for my model painting and other painting related crafts. All the other versions of paint holders I found either do not fit the specific bottles I use, or the pegs were too far apart or too large for my pegboard. I hope this helps the next person who wants a pegboard paint holder. 

If your bottle is only slightly larger than a FolkArt 33mm diameter bottle, it should still work. I modeled the circles to be about 1-2mm larger than the bottles so there is some wiggle room for any variance in bottles.

 

My models in the picture were printed using:

PLA Filament (The specific filament I used can be found here)

Organic Supports (Using PrusaSlicer)

Nozzle: 0.4

Layer: 0.2

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I isolated and adapted one of the pegboard models to fit 33mm diameter paint tubes, increased the amount of paint bottles it could hold, and added a 3rd peg for structural support.

License