Front license plate mounting bracket (Tesla Model 3/Y) [REPLACEMENT PART]

Have you lost one of your front license plate mount brackets on your Tesla? Well, I did, so I designed this replacement part so that I could put the front license plate back on. I tested it, and it worked well, so I am sharing this to hopefully help someone else.

-----

MODELS ARE IN 3MF AND STL

-----

IMPORTANT:

• Print with ≤0.08mm layer lines.
• I recommend at least 3 perimeters.
• NO SUPPORTS!
• No brim.

-----

AFTER PRINTING:

1. Take bracket off build plate
2. Grab your front license plate mount
3. Screw the bracket onto the mount with the “2 sides” of the bracket going in first
4. Keep rotating the bracket until it feels loose enough (BY LOOSE ENOUGH I MEAN SMOOTH ENOUGH, THE BRACKET WILL NOT FREE SPIN)
5. Mount the front license plate mount onto your tesla and twist the bracket to make it vertical so that the license plate mount stays on