Box For UW-Nikkor 35mm Lens (Nikonos 35mm Lens)

This is a storage/transport box for a UW-Nikkor 35mm Lens (Nikonos 35mm Lens)

This project has two files.

1. The Box 
2. The Lid
3. The Lid with Text

They are supposed to be held together with (6mmx10mm) magnets. You will need 8 of them. The fit is quite tight so you will need a tool to push the magnets into the cavity. Also, put some super glue when inserting it. 

In the attached photos, the lid has my logo on it. In the uploaded STLs the top of the lid is clean.

I suggest printing this Model with PETG.

CAUTION: Ensure you are aware of the magnets polarization when gluing them to the box and lid. If you insert the magnets in the incorrect way they will repel each other.