SPARKY: Micro Servo Mounts

Two micro servo mounts: 

• One with a horizontal axle orientation 
• One with a vertical axle orientation

Secure micro servo to mount with one M3x10mm screw & nut. Secure servo mount to robot with 2 M3x10mm screws and M3 nuts.

Mounting holes are 3mm diameter with 20mm spacing.

Additional Materials:

• Micro servo
• 3x M3x10mm screws (per mount)
• 3x M3 nuts

Required tools: 

• 2.5mm hex driver and 5.5mm nut driver for M3 screws and nuts

Slicer Settings:

Models are printed on a Bambu X1C using PLA with 0.20mm layer height, and no supports.

See also: SPARKY: an open academic robotics platform.