Bambu Labs X1/X1C/P1S LED riser and Airflow Vent with Adjustable Airlflow

WIP

----------------------------------------------------

Anyone who downloaded prior to Jan 5th 2024 and have problems with the top glass fitment, please see the Adapter parts added.

----------------------------------------------------

Experimental X1C/P1S riser with airflow control. Made to be glued together.

Instructions:

-Glue together all the parts with the same main name (Base, Top, etc). 

-It is not required to glue together the Top and Base. 

-The airflow ring should be glued together on a flat (non-stick, maybe wax paper?) surface, and only after all the glue joints are dry should you glue the back (unlabeled) one. There are numbers on the ends of the pieces to designated what to glue where. 

The LED channel is 12mm wide inside and has an 8mm opening. Wire management hole in the back to run the LED lights out of if not being internally wired.   

I suggest using some kind of grease or something to lubricate the movement of the ring, its a lot of friction. 

Untested/printed model.