LED Corner Bend

This is a corner for hiding those unsightly LED bends.
6
12
0
217
updated November 20, 2023

Description

PDF

I wanted to mount the led strips in a continuous pattern, but did not want to see the bends that result in this action.  I came up with these semi translucent corners to hide the bend and still allow light to come through.

As you can see from the last picture, you just pinch and bend your LED strips and then add a tiny bit of hot glue to each of the three pads of the corner holder and stick it over the bent led strip. 

Int he picture I used the large version.

 

Printed in Transparent White ABS from Hatchbox. 

https://www.amazon.com/HATCHBOX-3D-Filament-Dimensional-Transparent/dp/B00M0CS3B4/ref=sr_1_3?keywords=clear%2Bwhite%2Babs&qid=1700505168&sr=8-3&th=1

Tags



Model origin

The author marked this model as their own original creation.

License