this is a 3D-printed light switch cover that looks like a cat.
print settings/info
filament: 52grams when printed with 3 walls and 15% infill
supports: no
layer level: .2mm
brim: no unless you like using them or have really bad bed adhesion
speed: some sharp corners so be careful if you do not have good adhesion, but use a slow first layer for sure.
have fun printing!
any feedback would be welcome, also toggle switch coming soon.
feel free to use this for commercial use locally or online with a commission fee of 1$ payable to Venmo- Sutton Ingram @pork929
The author marked this model as their own original creation.