End cap for 19mm tubing 18mm ID

End Cap for RepRack: Open Source Spool Holder And Storage System
10
45
0
158
updated November 19, 2023

Description

PDF

If you have a pipe or tube with a  19mm  OD and a 18mm ID, this will work for you!  

I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have been designed to slice off as it goes in to keep it nice and firm - and they do!

It goes great with this model here!

 

My thanks go to Peter H.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

If you have a pipe or tube with a  19mm  OD and a 18mm ID, this will work for you!  

I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have been designed to slice off as it goes in to keep it nice and firm - and they do!

 

It goes great with this model here!

My thanks go to Peter H.

License