Inspired by a hold my friend really likes at the climbing gym I go to
11/17/23 I just listed my pack of 12 climbing holds on cgtrader and Cults3D for a very reasonable price. I have created all of these holds myself and I think they are very unique and offer great versatility for your home climbing wall! Enjoy this free hold as a sample of my work 😃
https://www.cgtrader.com/3d-print-models/hobby-diy/other/star-pack-climbing-holds https://cults3d.com/en/3d-model/tool/star-pack-climbing-holds
3/8-16 bolt hole with 3/8 washer (3/4 OD washer)
No. 10 screw for the screw holes
Fuzzy skin thickness: 0.3 (mm)
Fuzzy skin density = 6.0 (1/mm)
Fuzzy skin Point Distance = 0.1667 (mm)
Infill should be at least 30%, with at least 4 to 5 walls
I only weigh about 145 pounds and I've never had a hold break on me but be responsible and don't skimp out on material and print with more infill/walls for a stronger hold
Enjoy and let me know if there are any particular holds you want designed for your home walls! Also leave a comment if you need a version with different mounting holes, I will quickly add another STL file with custom bolt holes and screw holes if you need it.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
=30
Filament: OVERTURE PLA Matte Green
Notes:
Printed at an angle to be able to fit on a 220x220mm print bed
Also matte filaments add a tad more frictionHow I Designed This
Finishing holds
Usually for my holds I just quickly hit the surface that you will hold with low grit sandpaper. Not much but just to add a little more texture on top of the fuzzy skin. And then I generously chalk the hold up.
Category: Sport & Outdoors
The author marked this model as their own original creation. Imported from Thingiverse.