Jet Fan - fully 3d printed

what you need:

1- brushless motor ( 2212 2.5mm mount - 1000KV or higher)
2- ESC 30A
3- Servo motor tester
4- dewalt battery*

no need for an insert you can use any 4 CM scrow, but you can have them if you want

for all info check the “assembly_manual” PDF


*if you have another battery you can use the “scrow_hole_template” to use with other kinds
or you can edit the original.c4d file 

edit mount from PhantomHeadache

battary adapter from CFrolander (thingiverse.com)