IKEA TROFAST / KALLAX rail

Perfect for plastic bins but does not work with metal bins

Looks really great! The connecting notch between the two pieces was somehow not symmetric so they didn't fit very well. But it could be a problem caused by the slicer. I used the recommended 0.2mm layer thickness. Next time I will try a finer layer thickness.
But nevertheless it's great!

Great model works great. Thanks for sharing!

Finished this today and it's great. A bit hard to see in the picture because they're black and blend in so well to the rest of the black Kallax I did have to split the model into two pieces so that it fit on my Bambu Labs A1 Mini, but then it worked great! Printed in PLA and no issues so far.

Have you tried putting these next to each other in a 2x2 or 3x4 Kallax? I think the screws would clash right?

Thanks, works like a charm!

Hey, super remix des ganzen. Wäre es möglich, einen weiteren Abstandshalter zu bekommen? Ich hätte diese graue Box, mit diesen Unterteilungen und es sähe merkwürdig aus, wenn da der Spalt von grauer box zu transparenter box irgendwie riesig wäre :D (graue box -> transparente -> transparente ..so sähe mein kallax-fach aus)

Kurze Frage.. die passenden Boxen wären die 42x30cm wenn ich richtig liege?

One of the best Models i have ever printed. It works perfect. Good Work!