Standing at around 3 inches tall, this working cowbell can be a fun item to keep on the shelf, or place on your Christmas tree.
The cowbell is printed in two sections. The main bell you see, and the clapper on the inside that swings around.
This black and white bell you see in the pictures was printed in all white. And then the black cow print was painted on with acrylic paint. The cow print area is recessed into the bell making it much easier to paint inside the lines.
G-Codes files are available as well. They both just have a brim added on. As both pieces have smaller surface areas that could create bed adhesion problems. The Bell itself does not need support for internal crossbar at current scale. But If you want to scale it a lot bigger, I would consider a support inside for that.
Printed on an Ankermake M5C
This is my first ever 3D printing design. Was fun to figure out, hope you enjoy it.
The author marked this model as their own original creation.