3-Way Heatbed Cable Cover- Prusa MK3/S+

This cable cover the for Heatbed heater cable that allows the cable to flow in 3 different directions: Straight, Left Side, and Right Side. This is a useful component for when the printer is in an enclosure, or just operating within a tight space (as is my case). 

These parts can be printed without support material.

There are two variants available. One for the MK3 (screw head on the underside) and the MK3S+ (latest version). I assume this will also work for the MK4, though I cannot verify it myself.

All parts are designed to be printed in PETG and can be printed without support material.

• Recommended layer height is 0.2mm
• Recommended infill percentage 20%
• Suggested, though not necessary, to print the parts with support material on the build plate. Just so the counterbore features come out a bit cleaner.

• 3-Way cable routing