Riser for LG C1 OLED TV with cable management

Riser for the LG C1 OLED TV to clear most soundbars. Fits 55" and 65" models. Features cable management routes and can be printed in parts on a Prusa MINI+.

Make sure to route the cables BEFORE you put the TV on top, otherwise I recommend a wooden spoon to help route the cables through the holes.

I printed it in PETG with 3 perimeters and 5% infill.

Includes pre-cut parts for beds with an area of 180 mm x 180 mm or larger. Print  each part once for a complete set.

Includes a testprint for the dovetail connection (Dovetail_Test.stl) and a complete model in case you want to cut it up differently (LG_Riser_Skeletonized).

I wanted to recut the model for my Prusa MINI+, but ended up completely redesigning it using only the original footprint. Removed all of the non-load-bearing massive top shell to massively improve printing time and reduce material usage.