Just a very small edit to the files provided in the original for those who don't know how to use fusion 360.
This is a tube holder to work with Brassard tubes of 16mm ID, and a tube arm that will work with it, split in two for smaller print beds. The tube arm from the original will also work.
Print with supports.
You can see these parts in use here:
To use a tube less than the full width of the winding drum you can either use something to stop the yarn as in the video above, or use tape on the drum itself where winding paths cross to make an ‘X’ shape.
The user re-uploaded this model. The user is not the original author of the model.