A simple remix to add three 5mm deep holes into the two sides of the main stand body, into which flex pads can be added to reduce the chance of scratching the laptop case when inserting or removing it from the stand.
I've included the Fusion 360 model I used for the flex pads so you can change the height and top fillet radius of the pad, to fit your needs. I printed mine 7mm high to give a fairly tight fit for my laptop.
Print Details
I printed the main body with 5% grid infill and 2 perimeters, as it doesn't have many dynamic forces on it, and the Grid pattern looks nice with the semi transparent PETG I used.
The two supports were printed with 4 perimeters to add some additional strength to the joint between the base and the uprights.
The flex inserts were also printed with 5% infill, but I changed to Cubic infill, to give a better final infill layer for the final print layers to print onto.
Filament Details
Pinuotu Transparent Red PETG - Stand
SainSmart 95a Translucent Red TPU - Pads
The author remixed this model.
Added 6 soft pad inserts to try to reduce the chance of the laptop case being scratched by the hard plastic of the main stand body