3D Printer Zen Garden

Print without supports, print one (1) ZenBase and four (4) Latch files. Use the latches to hold the ZenBase to the printer bed.

Run the zen_garden.gcode to have it draw in the garden. GCode file will home X and Y axis (NOT Z) then disable the steppers. Move your nozzle to the INSIDE FRONT LEFT corner at the TOP of the garden, then press the button to confirm the position. Printer will only drop the nozzle 1mm into the garden to draw lines. File runs without heating nozzle or turning on cooling fan. GCode has a safety margin of 15mm on each side to hopefully prevent nozzle from running into the sides of the garden. Use at your own risk.

Python GCode generator included so that someone with more time/motivation can add patterns to draw in the sand.