Smurfette layered - keychan

My first 2D model created using online onshape, where each color has its own layer. So it is possible to print in color on any printer.

The dimensions of the Smurfette are 120x67x4.2mm

I didn't have blue filament at the moment, so we colored it manually with a marker.

If you would like, you can paint the dress and the cap red, as in the story "Smurfette Star".

But the current model is set automatically to change color in Pruša slicer only for 4 colors.

Dia Keychan is 6mm

the heights of the levels are:

black 3mm

blue 0.4mm

yellow 0.4mm

white 0.4mm

Print Settings:

Printer:Any

Rafts:No

Supports:No

Filament brand:Any (my Aurapol)

Filament color: Black, Blue, Yellow and White (Red marker)

Filament material:PLA

Notes:

0,2 mm layer

0.4mm nozzle
3 perimeter
15% infill

1 mm retraction 

0.4 Z-hop 

50 perimeters speed

215C temp for first layer

200C temp hotend