Charmander Lightbox LED Lamp

Illuminate your space with the adorable charm of Pokémon Charmander in this delightful lightbox. This carefully crafted design captures the essence of Charmander's playful demeanor and fiery tail, bringing the beloved Fire-type Pokémon to life in a charming way. The intricate details, from Charmander's expression to the flame flickering at the tip of its tail, make this lightbox a heartwarming tribute to a Pokémon fan-favorite. When lit, the lightbox radiates a warm and inviting glow, creating a cozy ambiance in any room. Whether you're a dedicated Pokémon trainer or simply a fan of whimsical décor, this Charmander lightbox is sure to bring joy and nostalgia to your space. 🔥💡

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!
 

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

How to make a hole in Bambu Studio:

Assembly video: 

How to print without AMS: