Ouroboros Medallion
Added ouroborus2coaster.3mf on 12/08/2023. Flat Bottom (details on one side only)
This is not an easy Print. I am not always designing with “easy” in mind. but I will give some pointers here. I have kept this in one piece, but it may (most likely) be easier to print if you do some of your own editing. with Prusa slicer. Do not shrink it down + the details are better suited for a .2 nozzle, don't print it flat. Print it vertical with the details facing the y axis. Edit it and do a plane cut so there is a bit of a small flat spot so you can get better than 0 adhesion (right) just a little cut… nothing obnoxious. Also, you may need to experiment with the supports. I generally do everything organic supports but that may not be the best. This is a piece to learn how to tune your printer with. Think like the slicer. '
add a torus and make it a Tree Ornamental.
Cut it on one side so it lays flat and make it a coaster. if flat on plate You can stretch it on the z axis to enhance the details, then cut it in half. again, it won't look as good if printed flat.
Inner design made with stable diffusion using prompt: “depth map, greyscale, black and white, dark lines, gnostic mysticism, Symbols, occult letterings, on round medallion.”
The author marked this model as their own original creation.