Ikea Kallax Coat Rack

I wanted to add a coat rack to the side of my Ikea Kallax bookshelf, so I designed this! It fits on either the left or right side of a Kallax, and mounts without any modification to the Kallax.

Prints without supports if you print with the flat sides oriented down on the build plate. Increase the perimeters and use a tough filament for extra strength. I printed with ABS, but PETG will probably do. Layer height doesn't matter - 0.30mm for speed.

A mirrored file is provided for convenience. Print one of each!

You will also need:

• ¾" x 15" wooden dowel
• 2 wood screws