Monkey D. Luffy from One Piece - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Esun Black Transmission Distance: 0.3
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ IIID Max Apple Green Transmission Distance: 4.5
PLA+ IIID Max Light Blue Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta
At layer #11 (0.96mm) swap to Pure Yellow
At layer #17 (1.44mm) swap to Apple Green
At layer #22 (1.84mm) swap to Light Blue for the rest.