XCAT Catamaran Phone, Cupholder and Mini-cooler System

Add a cupholder, phone holder, and mini cooler to your Row&Sail XCAT Catamaran with this accessory system.
1
12
0
201
updated November 8, 2023

Description

PDF

The XCAT Lacks a Cupholder or a Place to Put Your Phone or Bluetooth Speaker

I created this modular accessory system so that I could add and remove accessories as fast as it is to put the catamaran together. Designed for the Row&Sail XCAT Catamaran, you can start with a mount block that slips on to the XCAT center beam rail, then drop in whichever combination of accessories you would like. 

Assembly Instructions

Use ½" Stainless Steel Flathead M6 Bolts for rust prevention. Bolts are used to secure the Top Plate to the mounting block to prevent the accessories from coming out.

Print Recommendations

  • All Parts Print on Prusa Mini or Larger
  • All parts rotated and exported for printing without supports.
  • PETG Recommended (PLA May warp with prolonged sun exposure)
  • Recommend 4-6 Perimeters
  • .15-.2 Layer Height
  • 15% Infill

Cupholders/Phone Holder
Built in scupper holes for quick drainage should water splash up. I like having 2 cupholders, one for a speaker and another for my favorite beverage.

New Mini Cooler!
The mini-cooler can be printed on a Prusa Mini and works great for upto 4 - 12oz cans sideways or upright. Also works great for snacks or as a general stash box. 1" Flathead M6 Bolts recommended and don't over-tighten so lid can move at tension you set.
 

Tags



Model origin

The author marked this model as their own original creation.

License