Formula 1 Lightbox LED Lamp

The 3D model of a simple lightbox featuring the F1 logo is a sleek and stylish tribute to the world of Formula 1 racing. The unmistakable F1 emblem, with its bold and dynamic design, takes center stage, exuding the high-speed energy and excitement of the sport. This lightbox is a must-have for any Formula 1 enthusiast, adding a touch of racing glamour to your space. When illuminated, it casts a captivating glow that captures the essence of the racetrack. Whether you're a dedicated fan or simply appreciate the artistry of F1, this lightbox brings the thrill of the track right into your home. 🏁🏎💨💡

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!
 

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

How to make a hole in Bambu Studio:

Assembly video: 

How to print without AMS: