Slightly overbuilt paper towel roll mount

You will need:
3x 608 skateboard bearings
2x M8-1.25 x 40mm Socket head cap screws
1x M8-1.25 nut (preferably nylock)
3x Either M6 30mm button head bolts or 1/4-20 x 1.25" button head bolts
3x Either M6 nuts or 1/4-20 nuts (preferably nylock)
4x #8 x 3/4" screws to attach wall mounts to the clamp (I used 10-32 flat head bolts and tapped the holes but you do you)
6x #8 screws to attach to wall/whatever

Print Settings

Printer Brand:

Creality

Printer: 

CR-10

Rafts:

No

Supports: 

Only on “Rocker” part everything else is fine

Resolution:

200

Infill: 

20

Filament:
amazon basics PLA

Category: Household