Of all the Pi cases I've tried I keep coming back to this one. Simple and effective. Thank you.
modified case for raspberry pi 4 with camera pi + GPIO pins + 30x30 mm fan
more space inside to fit all the parts and the hole to use the GPIO pins.
45
446
2
2333
updated April 20, 2021
Makes
Comments
I really like the model, but i had a problem with it, which took me hours to figure out.
It seems like the four dots (to screw the fan in) and the rest of the top-case-part are two seperate files. At least cura and orca slicer imported them seperatly. When i sliced the model and looked closer i saw, that my slicer created paths for both objects independently, which caused the nozzle to move through already printed lines and ultimately a failed print.
After removing those 4 dots, the print worked as intended.
Nice simple case - good close fit. It makes a very useful "handle" for holding aboard during development and testing.
Fits perfectly. My fan did not fit on the holders, I drilled out the holes in the fan to 5mm and now it fits on the pins.
Printed in PETG in 0,2mm on a MK3s+
Very nice case, print well, fits perfectly ! THX !!!